| Missouri Environment and Garden |
Volume 12, No. 9 |
| News for Missouri's Gardens, Yards and Resources |
September 2006 |
Fall Management Practices for Lawn Recovery
Home lawns have once again struggled through
another hot, droughty summer. Our cool-season grasses
like Kentucky bluegrass, tall fescue and perennial ryegrass
have faced some disease pressures, insects and a lengthy
dormancy. Our night temperatures are beginning to dip
into the sixties once again and possibly the fifties very
soon. We have seen significant recovery in many of our
lawns with recent rainfall, however some parts of our lawns
may not be coming back and therefore require some overseeding.
With all this in mind, it’s that time of the year
again to open up the soil with some aeration followed by
some fall fertilization and over-seeding.
Aeration is a practice of pulling soil plugs to open the
soil surface for better nutrient and water movement. It is a
practice that also helps to reduce compaction and thatch by
spreading soil plugs on the surface. Soil plugs are crumbled
and fall freely into aeration holes as well as spreading some
soil into the thatch layer where soil microbes can feed on
thatch debris. Aeration is a practice that can be done in
both spring and fall and is the very best way to begin a
fall fertilization program. Applications of fertilizer after
aeration will move nutrients immediately into the rootzone
of your lawn. This practice has shown excellent results
in the density and color of cool-season turfgrasses on their
way to recovery from summer stresses. Spreading grass seed
after aeration is also an excellent practice in lawns that have
thinned considerably from summer drought.
Aeration equipment can be found at local rental stores
or garden centers as well. A machine that pulls a ½ inch
diameter plug three to four inches deep on four inch
centers will do an excellent job. Machines that force hollow
tines into the soil are better than pull-type drums with
tines. Not all machines will meet these specifications;
however any amount of aeration is better than no aeration
to kick-off fall fertilization.
When using aeration equipment as a tool for preparing
a seedbed, shallow divots are only required ½ to 1 inch
deep. Creating lots of divots with multiple passes is best.
Some lawns have a tendency to develop thatch as
it relates to mowing frequency and varieties of grasses
growing in your lawn. If you notice thatch developing in
your lawn, you may need to de-thatch. Lawns with thatch
up to ½ inch are generally OK, but as that thatch layer
approaches ¾ inch, it’s time to rent a de-thatching machine
from your local rental store or garden center. It may be
necessary to de-thatch in two directions raking debris each
time. Set the depth of the machine until the blades barely
tough the soil surface. You will notice some thinning of the
turf canopy; however recovery will occur throughout the
fall. De-thatching will improve the movement of nutrients
and water into the root-zone where they are needed. Fall is
usually the best time to de-thatch cool-season lawns, since
de-thatching in the spring can disrupt your pre-emergence
control for annual weeds (crabgrass and others).
A de-thatching machine is also an excellent piece of
equipment to prepare seedbeds prior to over-seeding.
The removal of thatch, with thinning of the turf canopy
exposing soil is a perfect situation for dropping seed into a
lawn improving seed/soil contact.
Fall fertilization should always start with a soil test to
determine what the needs of the soil are, if any. Soil pH
is also important as it affects nutrient availability to the
plants. Soil test results will give you nutrient levels, soil
pH and any information about lime requirements. A soil
pH around 6.5 to 6.8 is optimum. Soil pH between 6.0
and 7.0 are acceptable. MU guide #G6954, Soil Testing for
Lawns gives information on how to take and submit soil
samples to the University of Missouri Soil Testing Labs.
This guide sheet can be accessed through the Extension
Publications Website at http://extension.missouri.edu/explore/.
Homeowners have a wide variety of fertilizers available
to them for fall fertilization. Many organic fertilizers, such
as Milorganite, Sustane, Earthworks, Nature Safe and
Ringer are available and will provide an excellent source of
slow released nitrogen. Organic fertilizers do require soil
microbes to release nutrients, therefore as soil temperatures
decrease by late Fall, performance of these fertilizers may
drop off.
More inorganic types of fertilizers are available to
homeowners and can be somewhat confusing. Many
products have much higher amounts of nitrogen and
most are soluble forms (quick release) of fertilizers. Quick
release forms of fertilizers are there and gone after about
two to three weeks. You will get a quick flush of green
growth, then a quick tapering off of color and growth.
Find fertilizers with a good balance of N-P-K (nitrogen/
phosphorus/potassium) with a ratio somewhere around
3-1-2. Also look at the analysis label on the bag and find a
product with 30 to 70 percent slow-release nitrogen. This
way your fertilizer is released over a longer period of time
requiring fewer applications and allowing the plants to
more efficiently utilize plant nutrients.
Fertilizer rates for fall fertilization give best results
if 2.5 to 3.0 lbs of nitrogen can be applied per 1,000
square feet. Amounts should be divided over two or three
applications throughout the fall. Possible combinations
would include a pound of nitrogen per 1,000 square feet
in early September after aeration and/or de-thatching
followed by 1.5 pounds of nitrogen per 1,000 square feet
in late October. A second alternative would include a
pound of nitrogen per 1,000 square feet applied in early
September, October and November. Most fertilizers are
complete fertilizers including phosphorus and potassium;
therefore requirements for those nutrients should be based
on soil test results. Soil test results indicating high to very
high amounts of phosphorus and potassium may require
applications of fertilizers with nitrogen alone or lower
amounts of P and K.
Winterizing fertilizers are usually recommended as the
final application of the Fall for cool-season grasses. Good
winter fertilizers will have higher and equal amounts of
nitrogen and potassium (first and third numbers of the
fertilizer components). However, there are conflicting
comments about applications of additional potassium
for hardening off plants. Additional potassium does not
increase plant tissue potassium if amounts of potassium
in the soil are already high to very high. Application of
winterizing fertilizers simply insures potassium levels will
be sufficient for plants to harden off. If you regularly soil
test and know that your potassium levels are high, then
a winterizer fertilizer will not provide additional benefit
for you. It is a practice of higher importance for warmseason
grasses (zoysia and Bermuda) in late summer (early
September) as opposed to cool-season grasses in late Fall.
Any additional questions on aeration, de-thatching
and fall fertilization can be directed to Brad Fresenburg at
(573) 442-4893.
Brad S. Fresenburg, Turf Specialist,
MU Division of Plant Sciences
[ Back to Articles ]
[ Online Subscription Form ]
|